Jog Key Allocation Setting; Allocation Of The Jog Key - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

6.10.2 Jog Key Allocation Setting

6.10.2.1 Allocation of the Jog Key

6 Convenient Functions
6.10 Jog Key Allocation
• Allocation of the jog keys is valid only in the management mode
while only confirmation of allocated axes is valid in the operation
mode and edit mode.
The setup conditions are saved in the following parameters.
Even if the same numbered external axes are allocated to a
key (example:S1 for the 1st-axis), the value of the
parameter to be saved varies depending on the composition
NOTE
of the control group of the system. In this consequence,
when loading the parameter file (ALL.PRM or AC.PRM),
please make sure to confirm the allocating status before
executing the function.
Parameters for saving the setup conditions of jog key allocation.
S2C739 7th-axis
S2C740 8th-axis
1. Select {SETUP} under main menu.
2. Select {JOG KEY ALLOCATION}.
– Jog key allocation window appears.
6-111
CAUTION
a
RE-CSO-A037
351 of 554