155507-1CD
DX100
6.5.2 Operating Methods
6.5.2.1 Setting Adjustment Data
6
Convenient Functions
6.5 PAM Function
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window (in the teach mode) or the PLAYBACK
window (in the playback mode) appears.
3. Select {UTILITY} under the pull-down menu.
4. Select {PAM}.
– The PAM window appears.
A
B
C
D
E
F
5. Set adjustment data.
– Set adjustment data.
– A. Job
Set the job name to be adjusted.
Line up the cursor and press [SELECT] to display the JOB LIST
window.
Move the cursor to the desired job and press [SELECT] to set the
adjusted job.
– B. Status
Shows the status of adjustment in the PAM function.
"NOT DONE" appears when adjustment is not executed. "DONE"
appears when the execution of adjustment is completed.
– C. Input Coord
Set the desired coordinates.
Line up the cursor and press [SELECT] to display the selection
dialog box.
Move the cursor to the desired coordinate system and press
[SELECT] to set the input coordinates.
– D. Step Number
Set the step number to be adjusted.
Line up the cursor and press [SELECT] to display the number input
buffer line.
Input the step number and press [ENTER] to set the value.
– E. XYZ Coordinate Adjustment
Set the direction and amount of the X, Y, and Z coordinates.
Line up the cursor with the data to be adjusted and press [SELECT]
6-49
G
H
289 of 554
RE-CSO-A037