Resetting Job Reservation - YASKAWA DX100 Operator's Manual

DX100

4.5.2.3 Resetting Job Reservation

4 Playback
4.5 Playback with Reserved Start
NOTE
If "STARTING" is displayed, the job cannot be reset.
1. Select {JOB} on the RESERVATION STATUS window.
2. Select {RESET RESERVATION} or {RESET ALL}.
{RESET RESERVATION}
– When
stated to "RESERVE" is reset.
{RESET ALL}
– When
and "RESERVE" is reset.
– The confirmation dialog box appears.
3. Select "YES".
All job reservations are reset automatically in the following
conditions:
• When the reserved start sets to "PROHIBIT". (When
NOTE
"RESERVED START" is set to "PROHIBIT" on the
OPERATING CONDITION window.)
• When another job is called or an edit operation is
performed.
4-33
is selected, job reservation
is selected, job reservation stated to "STOP"
155507-1CD
RE-CSO-A037
222 of 554