YASKAWA DX100 Operator's Manual page 162

DX100
3 Teaching
3.9 Other Job-editing Functions
3. Move the cursor to the desired variable No.
– When the desired variable number is not displayed, move the cursor
with either of the following operations.
• Move the cursor on the variable No. and press [SELECT]. Then
input the variable No. using the Numeric keys and press
[ENTER].
• Move the cursor to the menu area and select {EDIT} 
{SEARCH}. Then input the variable No. with the Numeric keys
and press [ENTER]
4. Move the cursor to the data of the variable.
– The number can be directly typed.
5. Input the desired number.
6. Press [ENTER].
– Input value is set to the variable on the cursor position.
3-79
155507-1CD
Cursor is moved
to desired variable
number.
RE-CSO-A037
162 of 554