Set The Current Value To The Softlimit - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

6.14.4 Set the Current Value to the Softlimit

6 Convenient Functions
6.14 Softlimit Setting Function
1. Move the manipulator by the axis key.
– Move the manipulator to the position of which value is maximum
number or minimum number of the softlimit by the axis key.
2. Move the cursor to the desired axis of the softlimit (+) or the softlimit (-).
– When change the maximum number of the first softlimit, 
move the cursor to the first axis of the softlimit (+).
– When change the minimum number of the first softlimit, 
move the cursor to the first axis of the softlimit (-).
3. Press [MODIFY].
– The message [Update the data with <ENTER>.] appears.
– If perform the one of the following operations, the modify operation
will be canceled.
• Press [MODIFY] key.
• Press [SELECT] key.
• Press the one of [ ↑ ] [ ↓ ] [ ← ] [ → ] keys.
• Press [PAGE] key.
• Press [DIRECT OPEN] key.
• Press a ten key.
• Select the reserved display.
• Switch the screen.
• Switch the mode.
6-129
369 of 554
RE-CSO-A037