S3C000 To S3C047: Cube Soft Limit; S3C048 To S3C063: S-Axis Interference Area; S3C064 To S3C1087: Cubic Interference Area; S3C1089 To S3C1096: Robot Interference Area - YASKAWA DX100 Operator's Manual

For material handling, press tending, cutting, and other applications

Hide thumbs Also See for DX100:

Table of Contents

8.4.0.6 S3C000 to S3C047: CUBE SOFT LIMIT

8.4 Parameters According to Interference Area

These parameters specify auxiliary functions of S2C001 parameter. For

details, see section 8.4.0.2 "S2C001: CUBE SOFT LIMIT CHECK" on

These parameters specify auxiliary functions of S2C002 parameter. For

details, see section 8.4.0.3 "S2C002: S-AXIS INTERFERENCE CHECK"

on page 8-34.

These parameters specify auxiliary functions of S2C003 to S2C066

parameters. For details, see section 8.4.0.4 "S2C003 to S2C066: CUBE/

AXIS INTERFERENCE CHECK" on page 8-35.

These parameters specify auxiliary functions of S2C236 to S2C263

parameters. For details, see section 8.4.0.6 "S3C000 to S3C047: CUBE

SOFT LIMIT" on page 8-39.

This parameter specifies a side length of the cube for the work home

Show Quick Links

Table of Contents