S2C410: Word Registration Function; Word Editing Function Specification - YASKAWA DX100 Operator's Manual

For material handling, press tending, cutting, and other applications

Hide thumbs Also See for DX100:

Table of Contents

8.3.0.39 S2C410: WORD REGISTRATION FUNCTION / WORD EDITING

8.3.0.40 S2C413: JOB UNDELETE FUNCTION

8.3 Mode Operation Setting Parameters

FUNCTION SPECIFICATION

Specifies the valid or invalid to edit the words while inputting the

*It is able to edit the words when the security mode is the edit mode or the

management mode.

This function doesn't completely delete a job from its memory when

deleting the job, but saves the data so that the job can be restored as

This parameter can be set on {TEACHING CONDITION} window.

If a job is deleted while this function is valid, the job disappears from the

JOB LIST window. In this case, {TRASH JOB LIST} is newly displayed to

{JOB} on the main menu and the deleted job is listed on it.

The job will not be listed on the trash job list and will not be

restored if it is deleted when this function is invalid.

Show Quick Links

Table of Contents