Modifying Play Speed; Speed Override - YASKAWA DX100 Operator's Manual

155507-1CD
DX100
4.4

4.4.1 Speed Override

4 Playback

4.4 Modifying Play Speed

Modifying Play Speed
Speed modifications using the speed override have the following features:
• Speed can be modified during playback. 
The job can be played back at various speeds until the play speed is
properly adjusted.
• Speed can be increased or decreased by a ratio of the current play
speed. 
The ratio settings range from 10% to 150% in increments of 1%. 
Therefore, it is convenient when, for example, all play speed settings
are to be increased by 150% at the same time.
The operation flow is shown below.
(Speed data modify :OFF,specify the ratio)
Adjust the ratio during playback if needed
YES
NO
(Speed data modify: ON,specify the ratio)
4-20
Start speed override
Call job to perform speed override
Set speed override
Start playback
(1cycle completed)
Reset and playback?
NO
Modify?
YES
Call job to perform speed override
Set speed override
Start playback
Modify play speed simultaneously
(1cycle completed)
End
Changes experimentally,
without modifying registered
speed
Modifies play speed
209 of 554
RE-CSO-A037