S2C211: Language Level; S2C214: Instruction Input Learning Function; S2C215: Address Setting When Control Power Is; Turned On - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

8.3.0.13 S2C211: LANGUAGE LEVEL

8.3.0.14 S2C214: INSTRUCTION INPUT LEARNING FUNCTION

8.3.0.15 S2C215: ADDRESS SETTING WHEN CONTROL POWER IS TURNED

8.3.0.16 S2C216: JOB LIST DISPLAY METHOD AT JOB SELECTION

8 Parameter
8.3 Mode Operation Setting Parameters
This parameter specifies the level of the robot language (INFORM III).
The levels simplify the instruction registering operation. With the DX100,
all robot instructions can be executed regardless of specification of
instruction sets. The specification can be done on the TEACHING
CONDITION window.
0: Contracted Level 
Only frequently used robot instructions are selected to reduce the number
of instructions to be registered. Robot instructions displayed on the
instruction dialog box are also reduced so that specification is simplified.
1: Standard Level
2: Expanded Level 
All the robot instructions are available in standard and expanded levels.
The two levels are distinguished by the number of additional information
items (tags) that can be used with robot instructions. At the expanded
level, the flowing functions are available.
• Local Variables and Array Variables
• Use of Variables for Tags (Example: MOVJ VJ=I000) 
The above functions are not available at the standard level, however,
which reduces the number of data required to register instructions,
thereby simplifying the operation.
This parameter specifies whether to set a line of instructions that has been
input on the input buffer line when pressing the first soft key for each
instruction. If "PROVIDED" is selected, the instructions are set.
0 : Without learning function
1 : With learning function
ON
This parameter specifies the processing of the job name, step No., and
line No. that are set when the control power supply is turned ON.
0 : Reproduces the address when power supply is turned ON.
1 : Lead address (Line"0") of the master job.
These parameters specify the displaying method on the JOB LIST window
at job selection.
0 : Order of Names
1 : Order of Date
8-16
447 of 554
RE-CSO-A037