YASKAWA DX100 Operator's Manual page 242

For material handling, press tending, cutting, and other applications

Hide thumbs Also See for DX100:

Table of Contents

Convenient Functions

6.1 One-touch Operation "Direct Open"

1. In the JOB CONTENT window, move the cursor to the job name or the

condition file for which the window is to be displayed.

2. Press the direct open key

– This key lamp lights and the JOB CONTENT window or the

condition file window appears.

– When the direct open key

turns OFF, and the window returns to the former JOB CONTENT

• The direct open function cannot be used again while a

directly opened window is shown.

• If another window is selected while the direct open

function is effective, the function is automatically cancelled

and the lamp on the direct open key goes out.

• Once another JOB CONTENT window is opened by the

direct open function, the former job cannot be

continuously operated. (Stopped until the opened JOB

CONTENT window is closed.)

is pressed once again, the key lamp

Show Quick Links

Table of Contents