Playback - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

4

Playback

4.1 Preparation for Playback
Automatic Setting for Operation Cycle
Automatic setting of the operation cycle can be changed by the following
operation.
This can be done in the management mode only.
1. Select {SETUP} under the main menu.
2. Select {OPERATE COND}.
– The OPERATING CONDITION window appears. Use the cursor to
scroll the screen.
3. Select the desired operation.
– The selection dialog box appears.
"NONE" setting
The operation cycle is not changed when "NONE" is set.
SUPPLE-
For example, if the setting is "CYCLE SWITCH IN PLAY
MENT
MODE = NONE", the operation cycle is maintained even
after switching to the play mode.
4-8
197 of 554
RE-CSO-A037