Operation Condition Setting - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

6.9.3 Operation Condition Setting

6 Convenient Functions
6.9 Parameter Setting Function
Select {SETUP}  {OPERATE CONDITION SETTING} to display the
following window.
• SPEED DATA INPUT FORM (S2C221)
Refer to section 8.3.0.21 "S2C221: SPEED DATA INPUT FORM" on
page 8-18.
Setting Parameter Value
mm/sec 0
cm/min 1
inch/min 2
mm/min 3
• CYCLE SWITCH IN TEACH MODE (S2C313)
Refer to section 8.3.0.33 "S2C313: TEACH MODE FIRST CYCLE
MODE" on page 8-21.
Setting Parameter Value
Step 0
Cycle 1
Auto 2
None 3
6-99
339 of 554
RE-CSO-A037