Parallel Shift Job Conversion Operation - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

6.4.3.2 Parallel Shift Job Conversion Operation


6 Convenient Functions
6.4 Parallel Shift Job Conversion Function
There are two methods for specifying the shift value.
• Directly input the shift value by numerical value.
• Calculate the shift value by teaching the original base point and
converted base point.
The method using position variables by parameter setting is
described in section 6.4.4 "Specifying the Shift Value by
SUPPLE-
Position Variables" on page 6-39 other than above two
MENT
methods.
The following are the operation procedures by each setting of shift value
for parallel shift job conversion.
Numerical Value Input
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Select {UTILITY} under the pull-down menu.
4. Select {PARALLEL SHIFT JOB}.
– The PARALLEL SHIFT JOB window appears.
5. Specify the conversion items.
– Specify each item.
6-33
273 of 554
RE-CSO-A037