Copying Jobs On The Job List Window - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

5.1.0.2 Copying Jobs on the JOB LIST Window

5 Editing Jobs
5.1 Copying Jobs
See section 1.2.6 "Character Input Operation" on page 1-18
SUPPLE-
for information on letter input operations.
MENT
5. Press [ENTER].
– The confirmation dialog box appears.
– If "YES" is selected, the job is copied and the new job appears.
– If "NO" is selected, the job copy is not executed, and the process is
canceled.
On the JOB LIST window, select the copy source job from the registered
jobs and specify the copy destination directory.
1. Select {JOB}  {SELECT JOB} under the main menu.
– The JOB LIST window appears.
2. Move the cursor to the copy source job.
3. Select {JOB}  {COPY JOB} under the pull-down menu.
5-3
229 of 554
RE-CSO-A037