YASKAWA DX100 Operator's Manual page 8

DX100
Description of the Operation Procedure
Registered Trademark
Description of the Operation Procedure
Descriptions of the programming pendant keys, buttons, and displays are
shown as follows:
Equipment
Programming 
Character Keys The keys which have characters printed on
Pendant
Symbol Keys
Axis Keys 
Numeric Keys
Keys pressed
simultaneously
Displays
In the explanation of the operation procedure, the expression "Select • • • "
means that the cursor is moved to the object item and the SELECT key is
pressed, or that the item is directly selected by touching the screen.
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and
viii
Manual Designation
them are denoted with [ ].
ex. [ENTER]
The keys which have a symbol printed on
them are not denoted with [ ] but depicted
with a small picture.
GO BACK GO BACK
ex. page key
PAGE PAGE
The cursor key is an exception, and a picture
is not shown.
"Axis Keys" and "Numeric Keys" are generic
names for the keys for axis operation and
number input.
When two keys are to be pressed
simultaneously, the keys are shown with a
"+" sign between them,
ex. [SHIFT]+[COORD]
The menu displayed in the programming
pendant is denoted with { }.
ex. {JOB}
TM
are omitted.
RE-CSO-A037
155507-1CD
8 of 554