Registering Jobs To Stations - YASKAWA DX100 Operator's Manual

155507-1CD
DX100

4.5.1.3 Registering Jobs to Stations

4 Playback
4.5 Playback with Reserved Start
Register the starting job of each station.
This operation can be done only when the operation mode
is the teach mode and the setting of "RESERVED START
NOTE
JOB CHANGE" is "PERMIT" in the OPERATING
CONDITION window.
1. Select {JOB} under the main menu.
2. Select {RES. START(JOB)}.
– The RESERVED START (JOB) window appears.

– indicates that the input/output number is registered.
–  indicates that the input/output number is not registered.
3. Select the job name for each station.
– The selection dialog box appears.
Select "SETTING START JOB
4.
– The JOB LIST window appears.
4-28
".
RE-CSO-A037
217 of 554