Registering Comments; Registering Control Groups - YASKAWA DX100 Operator's Manual

DX100

3.1.3.3 Registering Comments

3.1.3.4 Registering Control Groups

3 Teaching
3.1 Preparation for Teaching
2. Select {CREATE NEW JOB}.
– The NEW JOB CREATE window appears.
3. Input job name.
– Move the cursor to JOB NAME, and press [SELECT]. Input job
names using the character input operation. For information on
character input operation, refer to section 1.2.6 "Character Input
Operation" on page 1-18.
4. Press [ENTER].
Register a comment using up to 32 alphanumeric and symbol characters
as required.
1. Enter a comment.
– In the NEW JOB CREATE window, move the cursor to the comment
and press [SELECT]. For information on character input operation,
refer to section 1.2.6 "Character Input Operation" on page 1-18.
2. Press [ENTER].
Select the control group that has been registered in advance. If external
axes (BASE or STATION) or multiple robot systems are not used, the
registration of control groups is not required.
3-3
155507-1CD
RE-CSO-A037
86 of 554