Front Regulator And Motor Assembly - Subaru Legacy 2003 Service Manual

Hide thumbs Also See for Legacy 2003:

Table of Contents

FRONT REGULATOR AND MOTOR ASSEMBLY

GLASS/WINDOWS/MIRRORS

7. Front Regulator and Motor

1) Remove door trim. <Ref. to EI-30, REMOVAL,

Front Door Trim.>

2) Remove sealing cover. <Ref. to EB-13, RE-

MOVAL, Front Sealing Cover.>

3) Remove inner remote. <Ref. to SL-19, REMOV-

AL, Front Inner Remote.>

4) Remove door glass. <Ref. to GW-12, REMOV-

AL, Front Door Glass.>

5) Disconnect motor connector.

6) Loosen four bolts and two nuts to pull out regu-

lator assembly.

7) Loosen screws to remove motor assembly.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust front door glass. <Ref. to GW-13, AD-

JUSTMENT, Front Door Glass.>

C: INSPECTION

1) Make sure that power window motor rotates

properly when battery voltage is applied to termi-

nals of motor connector.

2) Change polarity of battery connections to termi-

nals to ensure that motor rotates in reverse direc-

Table of Contents