Front Wiper Motor And Link - Subaru IMPREZA 2001 Service Manual

7. Front Wiper Motor and Link

A: REMOVAL
NOTE:
The positions for RHD model are symmetrically op-
posite.
1) Remove cowl panel. <Ref. to EI-17, REMOVAL,
Cowl Panel.>
2) Disconnect connector of motor.
3) Loosen bolts and nuts to remove wiper link.
4) Loosen bolts and nuts to remove motor.
B: INSTALLATION
1) Tighten the nut where rod (A) and link plate (B) is
aligned in straight line.
2) Install in the reverse order of removal.
FRONT WIPER MOTOR AND LINK
B5M1466
B5M1467
BO0274
WW-17
WIPER AND WASHER SYSTEMS
C: INSPECTION
1) When battery is connected to terminal of con-
nectors, confirm that motor operates at low speed.
2) When battery is connected to terminal of con-
nectors, confirm that motor operates at high speed.
3 2
3) Connect battery to terminals of connector, and
remove terminal connection with motor rotated at
low speed, and stop wiper motor through operation.
4) Connect battery and confirm that motor stops at
automatic stop position after motor operates at low
speed again.
3 2 1
5 4
BO0201
1
5 4
BO0202
3 2 1
5 4
BO0203
3 2 1
5 4
BO0204