Front Regulator And Motor Assembly - Subaru Legacy 2002 Service Manual

FRONT REGULATOR AND MOTOR ASSEMBLY

Glass/Windows/Mirrors
7. Front Regulator and Motor
Assembly
S905449
A: REMOVAL
S905449A18
1) Remove door trim. <Ref. to EI-30, REMOVAL,
Front Door Trim.>
2) Remove sealing cover. <Ref. to EB-14,
REMOVAL, Front Sealing Cover.>
3) Remove inner remote.
REMOVAL, Front Inner Remote.>
4) Remove door glass.
REMOVAL, Front Door Glass.>
5) Disconnect electrical connector.
6) Loosen four bolts and two nuts to pull out regu-
lator assembly.
7) Loosen screws to remove motor assembly.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust front door glass. <Ref. to GW-14,
ADJUSTMENT, Front Door Glass.>
C: INSPECTION
1) Make sure that power window motor rotates
properly when battery voltage is applied to termi-
nals of motor connector.
2) Change polarity of battery connections to termi-
nals to ensure that motor rotates in reverse direc-
tion.
<Ref. to SL-19,
<Ref. to GW-13,
B5M1049
B5M1050
S905449A11
S905449A10
GW-16