Show Ip Bgp Peer-Group - Dell Z9500 Command Reference Manual

Field
Community
Example
Dell#show ip bgp paths community
Total 2 communities
Refcount
1
1

show ip bgp peer-group

Allows you to view information on the BGP peers in a peer group.
Z9500
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] peer-group [peer-group-name [detail | summary]]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
peer-group-
name
detail
summary
Command
•
Modes
•
478
Description
Displays the community attributes in this BGP path.
Community
NO-ADVERTISE
200:1
(OPTIONAL) Enter the keyword vrf to view information on
BGP peers in a peer group corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related only to ipv6
unicast routes.
(OPTIONAL) Enter the name of a peer group to view
information about that peer group only.
(OPTIONAL) Enter the keyword detail to view detailed
status information of the peers in that peer group.
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary
command.
EXEC
EXEC Privilege
1000:1 3000:1
NOTE: You can use this attribute to view information on
BGP peers in a peer group that correspond to either a
default or a non-default VRF.
Border Gateway Protocol