XPS Unified
6.5.4
ZYGO Error Code Table
Error Code
-100001
-100002
-100003
-100004
-100005
-100020
-100021
-100022
-100023
-100024
-100025
-100026
-100027
-100028
-100029
-100030
-100031
-100032
-100033
-100034
-100035
-100036
-100037
-100050
-100051
-100052
-100053
The error description is returned by the "ErrorStringGet" function.
All error code list is returned by the "ErrorListGet" function.
Syntax error in command or unrecognized command
Internal error occurred while parsing request
Invalid character detected in command input
Un-terminated string
Invalid hex number
Error accessing the Measuring Board
Operation not supported for ZEC-Measuring Board set
Invalid Register offset detected
Invalid axis number detected
Invalid ADC Mux value detected
ADC operation timed out
Invalid EEPROM offset detected
EEPROM operation timed out
Invalid register type specified
Value to write too large for register type
Value to write missing
Invalid operation type specified
Value to write invalid
Internal error saving Ethernet Card configuration data
Invalid IP address
Invalid Subnet mask
Invalid Gateway IP address
UDP Measurement Data transmission already in progress
Another Firmware update is already in progress
Firmware update irrecoverable file transfer error
Firmware update file data received is incomplete
Firmware update error performing a PROM operation
39
Programmer's Manual
Description
EDH0373En1023 — 01/18