Newport XPS Programmer's Manual page 698

XPS Unified
EDH0373En1023 — 01/18
Gathering running
-43
-44 Slave error disabling master
-45 End of run activated
-46 Not allowed action due to backlash
-47 Wrong TCL task name: each TCL task name must be different
-48 BaseVelocity must be null
-49 Inconsistent mechanical zero during home search
-50 Motor initialization error: check InitializationAcceleration
-51 Spin value out of range
-52 Group interlock
-53 Not allowed action due to a group interlock
-60 Error during file writing or file doesn't exist
-61 Error during file reading or file doesn't exist
-62 Wrong trajectory element type
-63 Wrong XY trajectory element arc radius
-64 Wrong XY trajectory element sweep angle
-65 Trajectory line element discontinuity error or new element is too small
-66 Trajectory doesn't content any element or not loaded
Velocity on trajectory is too high
-68
-69 Acceleration on trajectory is too high
-70 Final velocity on trajectory is not zero
Error write or read from message queue
-71
-72 Error during trajectory initialization
-73 End of file
Error file parameter key not found
-74
-75 Time delta of trajectory element is negative or null
-80 Event not configured
Action not configured
-81
-82 Event buffer is full
-83 Event ID not defined
Secondary positioner index is too far from first positioner
-85
-90 Focus socket not reseved or closed
-91 Focus event scheduler is busy
Error of executing an optional module
-95
-96 Error of stopping an optional module
-98 Error of unloading an optional module
Fatal external module load: see error.log
-99
-100 Internal error (memory allocation error, ...)
-101 Relay Feedback Test failed: No oscillation
Relay Feedback Test failed: Signal too noisy
-102
-103 Relay Feedback Test failed: Signal data not enough for analyse
-104 Error of tuning process initialization
Error of scaling calibration initialization
-105
-106 Wrong user name or password
-107 This function requires to be logged in with Administrator rights
The TCP/IP connection was closed by an administrator
-108
Group need to be homed at least once to use this function (distance
-109
mesured during home search)
684
Programmer's Manual