Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Newport XPS
Summary of Contents for Newport XPS
- Page 1 XPS Controller Universal High-Performance Motion Controller/Driver Quick Start...
- Page 2 Quick Start Warranty Newport Corporation warrants that this product will be free from defects in material and workmanship and will comply with Newport’s published specifications at the time of sale for a period of one year from date of shipment. If found to be defective during the warranty period, the product will either be repaired or replaced at Newport's option.
-
Page 3: Table Of Contents
Installing Driver cards ..................5 2.4.2 Power ON ......................6 Connecting to the XPS ..................... 6 2.5.1 Direct Connection to the XPS controller ............6 2.5.2 Ethernet Card Address Settings ............... 7 2.5.3 Stages Configuration for Newport Stages (Auto-Configuration) ....8 2.5.4... - Page 4 XPS Motion Controller/Driver Quick Start EDH0205En1051 – 10/17...
-
Page 5: Preface
Customer shall protect the Newport Programs and Related Materials as trade secrets of Newport, and shall devote its best efforts to ensure that all its personnel protect the Newport Programs as trade secrets of Newport Corporation. Customer shall not at any... -
Page 6: Service Information
Quick Start Service Information The user should not attempt any maintenance or service of the XPS Series Controller/Driver system beyond the procedures outlined in this manual. Any problem that cannot be resolved should be referred to Newport Corporation. When calling... -
Page 7: Introduction
To maximize the value of the XPS Controller/Driver system, it is important that users become thoroughly familiar with available documentation: The XPS Quick Start and XPS User’s Manual are delivered with the controller. -
Page 8: Electric Shock
Electric Shock Figure 2: Electrical Shock Symbol. The Electrical Shock Symbol in Figure 2 may appear on labels affixed to the XPS Series Controller/Driver. This symbol indicates a hazard arising from dangerous voltage. Any mishandling could result in damage to the equipment, personal injury, or death. -
Page 9: General Warnings And Cautions
• Disconnect power before cleaning the Controller/Driver unit. Do not use liquid or aerosol cleaners. • Do not open the XPS Controller/Driver stand-alone motion controller. There are no user-serviceable parts inside the XPS Controller/Driver. • Return equipment to Newport Corporation for service and repair. -
Page 10: Getting Started
Getting Started Unpacking and Handling It is recommended that the XPS Controller/Driver be unpacked in your lab or work site rather than at the receiving dock. Unpack the system carefully; small parts and cables are included with the equipment. Inspect the box carefully for loose parts before disposing of the packaging. -
Page 11: System Setup
Installing Driver cards Figure 6: Installing Driver cards. Due to the high power available in the XPS controller (300 W for the CPU and 500 W for the drives), ventilation is very important. To ensure a good level of heat dissipation, the following rules must be followed: 1. -
Page 12: Power On
• The system must be installed in such a way that power switch and power connector remain accessible by the user. • After the main power is switched on, the LED on the front panel of the XPS will turn green. -
Page 13: Ethernet Card Address Settings
XPS Motion Controller/Driver Quick Start 2.5.2 Ethernet Card Address Settings In order to be able to communicate with the controller, you must set your Ethernet card in the following way (this procedure is for the Windows XP operating system): 1. Start Button > Control Panel > Network Connections. -
Page 14: Stages Configuration For Newport Stages (Auto-Configuration)
XPS Motion Controller/Driver Quick Start 2.5.3 Stages Configuration for Newport Stages (Auto-Configuration) For Non Newport stages, please refer to the XPS User’s Manual. 1. Open your web browser (as Internet Explorer) and connect to: http://192.168.0.254 The welcome web page appears. Fill the... -
Page 15: Xps Controller/Driver Documentation
• Maintenance and service (cleaning, service, troubleshooting). The Motion Tutorial The other part of the book provides an exhaustive overview of the XPS architecture, and a complete description of its features and capabilities. It is educational and it contains the following sections: •... - Page 16 In order to provide user’s access to the most actual documentation, the Programmer’s Manual, the Software Drivers Manual and the TCL Manual are only supplied as software copies. They can get accessed from the XPS web site or downloaded from the XPS controller via FTP.
-
Page 17: Service Form
XPS Motion Controller/Driver Quick Start Service Form Your Local Representative Tel.: __________________ Fax: ___________________ Name: _________________________________________________ Return authorization #: ____________________________________ (Please obtain prior to return of item) Company:_______________________________________________ Address: ________________________________________________ Date: __________________________________________________ Country: ________________________________________________ Phone Number: __________________________________________ P.O. Number: ____________________________________________... - Page 18 Visit Newport Online at: www.newport.com North America & Asia Europe Newport Corporation MICRO-CONTROLE Spectra-Physics S.A.S 1791 Deere Ave. 9, rue du Bois Sauvage Irvine, CA 92606, USA 91055 Évry CEDEX France Sales Tel.: (800) 222-6440 Sales e-mail: sales@newport.com Tel.: +33 (0)1.60.91.68.68 Technical Support e-mail: france@newport.com...