Xps Standard Firmware Architecture (Base Version); Group Definition; Object Structure - Newport XPS Programmer's Manual

XPS Unified Programmer's Manual
5.0

XPS Standard Firmware Architecture (Base Version)

5.1

Group Definition

The "Group" objects are used to define one or several "positioners" in the same motion
group. The available motion groups are defined in the section [GROUPS] in the
system.ini file and the group types are:
• SingleAxis (1 positioner)/"Gantry" SingleAxis (2 positioners)
• SingleAxisWithClamping (1 positioner)
• SingleAxisTheta (1 positioner)
• Spindle (1 positioner)
• XY (2 positioners)/"Gantry" XY (3 or 4 positioners)
• XYZ (3 positioners)
• MultipleAxes/"Gantry" MultipleAxes (1 to 8 positioners)
• TZ (3 positioners)
5.1.1

Object Structure

A motion "Group" is created in relation to a group type (SingleAxis,
SingleAxisWithClamping, SingleAxisTheta, Spindle, XY, XYZ, TZ or MultipleAxes).
A group is defined by a group name.
NOTE
The maximum number of positioners in the same group is limited to 8.
13 EDH0373En1023 — 01/18