Zygoreset - Newport XPS Programmer's Manual

XPS Unified
EDH0373En1023 — 01/18
7.2.2.56

ZygoReset

Name
ZygoReset – Reset all Zygo axes.
Input tests
- Refer to section 7.1: "Input Tests Common to all XPS Functions".
- Checks if Zygo mode is enabled: (-205)
- Checks Zygo TCP Server Connexion: (-1001)
Description
This function sends commands to Zygo ZMI 2402 to reset all Zygo axes (#1 and #2).
Prototype
int ZygoReset(
int SocketID
)
Input parameters
SocketID
Output parameters
None.
Return (In addition to the results of "Input Tests Common to all XPS
Functions")
• 0: No error.
• -205: Not enable in your configuration.
• -1001: The controller is not connected to Zygo TCP server. Run
ZygoStartInterferometer API.
int Socket identifier gets by the
"TCP_ConnectToServer" function.
654
Programmer's Manual