Moveslice - Newport XPS Programmer's Manual

XPS Unified
7.2.2.22

MoveSlice

Name
MoveSlice – Executes a slice move on an XY group.
Input tests
- Refer to section 7.1: "Input Tests Common to all XPS Functions".
- Verifies target position in relation with the travel limits: (-17)
- Checks the group status, it must be "READY" state: (-22)
Description
This API moves the stage to perform a "U-turn".
The slice move begins a linear interpolation to move to (Xinter, Yend) but when the
stage has finished the constant velocity phase, the slice move changes the target position
to go to (Xend, Yend).
Prototype
int MoveSlice(
int SocketID,
double Yend_um,
double Xend_um,
double ScanAngle_urad
)
Input parameters
SocketID
Yend_um
Xend_um
ScanAngle_urad
int Socket identifier gets by the
"TCP_ConnectToServer" function.
double y target position in µm.
double x target position in µm.
double Scan angle in µrad.
615
Programmer's Manual
EDH0373En1023 — 01/18