XPS Unified
Close XPS Connection
if
(m_xpsInterface != null)
m_xpsInterface.CloseInstrument();
3.4
How to Use XPS .NET Assembly from LabVIEW?
Refer to
LabVIEW
depending on your LabVEW version.
3.4.1
Add Reference to .NET Assembly
Select CommandInterfaceXPS and XPS constructor from a .Net Constructor Node
(refer to Connectivity panel):
3.4.2
LabVIEW Code Sources
The instance of "XPS" object is created after configuration of .Net Constructor Node:
Open XPS connection (Use a .Net Invoke Node to select the XPS method
"OpenInstrument"):
for more information on how to load and use a .NET assembly
7
Programmer's Manual
EDH0373En1023 — 01/18