Te Read Error Code - Newport LDS1000 User Manual

LDS1000
10.5.14
Related command
TE
Use MNL
Syntax TE
Parameter
Description
Response TEaa
Errors D
S
Example TE
TE@
TB
Controller for Laser Diode Sensors
Read Error Code
RMT ACT
None.
Read last error code generated by the LDS1000 Controller:
ASCII character stored in error register.
The error register is reset when read with TB or TE.
Only the last error encountered can be read again.
aa = Current Error Code.
Error messages:
@ : No error.
A : Unknown message code.
B : Incorect axis number.
C : Parameters out of limits.
D : Execution not allowed.
O : Variable is out of range.
S : Communication time-out.
Execution not allowed.
Communication time-out.
| Read error code.
| No error.
Read error.
49
EDH0170FE1010 – 09/98