Newport XPS Programmer's Manual page 313

XPS Unified
Input parameters
SocketID
PositionerName
NotchModeNumber
NotchModeFr
NotchModeFa
NotchModeZr
NotchModeZa
Output parameters
None.
Return (In addition to the results of "Input Tests Common to all XPS
Functions")
• 0: No error.
• -8: Wrong object type for this command.
• -17: Parameter out of range or incorrect.
• -18: Positioner Name doesn't exist or unknown command.
• -24: Not available in this configuration (check hardware or configuration).
• -134: Changing the loop status is allowed in DISABLE state only.
299
int Socket identifier gets by the
"TCP_ConnectToServer" function.
char * Positioner name.
int Number of the selected notch mode filter.
double Resonance frequency (Hertz) for notch mode
filter.
double Anti-resonance frequency (Hertz) for notch
mode filter.
double Resonance damping factor for notch mode filter.
double Anti-resonance damping factor for notch mode
filter.
Programmer's Manual
EDH0373En1023 — 01/18