Table of Contents
Advertisement
XPS Unified
EDH0373En1023 — 01/18
This API is enabled only with a ZMI system equipped of PEG function.
Refer to ZYGO ZMI 2400 with PEG Function (revision J)
Prototype
int ZygoSetPEGParams(
int SocketID,
long P1,
long P2,
unsigned int Delta1,
long K1,
unsigned int Delta2,
long K2,
int ControlWord
)
Input parameters
SocketID
P1
P2
Delta1
K1
Delta2
K2
ControlWord
Output parameters
None.
Return (In addition to the results of "Input Tests Common to all XPS
Functions")
• 0:
No error.
• -2:
TCP timeout.
• -127:
Wrong parameter type in the command string: long or long * expected.
• -205:
Not enable in your configuration.
• -1000:
Zygo command execution failed.
• -1001:
The controller is not connected to Zygo TCP server. Run
ZygoStartInterferometer API.
662
NOTE
int
Socket identifier gets by the
"TCP_ConnectToServer" function.
long
Start PEG region (+/- 660 mm).
long
End PEG region (+/- 660 mm and P2 >P1).
unsigned int Increment value (max 20 µm).
long
Number of PEG events.
unsigned int Increment value (max 20 µm).
long
Number of PEG events.
int
PEG control (refer to PEG Control register).
Programmer's Manual
.
- Quick Links:
- Tcp/Ip Communication
Hide quick links:
Advertisement
Table of Contents
