XPS Unified
Input parameters
SocketID
PositionerName
SpatialNotchStep
SpatialNotchBandwidth
SpatialNotchGain
SpatialNotchNumber
Output parameters
None.
Return (In addition to the results of "Input Tests Common to all XPS
Functions")
• 0:
No error.
• -8:
Wrong object type for this command.
• -17:
Parameter out of range or incorrect.
• -18:
Positioner Name doesn't exist or unknown command.
• -24:
Not available in this configuration (check hardware or configuration).
• -134:
Changing the loop status is allowed in DISABLE state only.
313
int
Socket identifier gets by the
"TCP_ConnectToServer" function.
char *
Positioner name.
double
Step for spatial notch filter.
double
Band width (Hertz) for spatial notch filter.
double
Gain for spatial notch filter.
int
Number of the selected Spatial Notch Frequency
filter.
Programmer's Manual
EDH0373En1023 — 01/18