Positionercompensationdualloopnotchfilterget - Newport XPS Programmer's Manual

XPS Unified
EDH0373En1023 — 01/18
7.2.1.169

PositionerCompensationDualLoopNotchFilterGet

Name
PositionerCompensationDualLoopNotchFilterGet – Gets the notch filter parameters.
Input tests
- Refer to section 7.1: "Input Tests Common to all XPS Functions".
- Checks the object type of this command is valid: (-8)
- Checks the notch filter number: (-17)
- Checks the positioner name: (-18)
- Checks dual corrector is enabled: (-205)
Description
This function returns the parameters defined for the selected notch filter in dual loop.
Notch filters parameters:
• NotchFrequency.
• NotchBandwidth.
• NotchGain.
Prototype
int PositionerCompensationDualLoopNotchFilterGet(
int SocketID,
char * PositionerName,
int NotchFrequencyNumber,
double * NotchFrequency,
double * NotchBandwith,
double * NotchGain
)
Input parameters
SocketID
PositionerName
NotchFrequencyNumber
Output parameters
NotchFrequency
NotchBandwith
NotchGain
int Socket identifier gets by the
"TCP_ConnectToServer" function.
char * Positioner name.
int Number of the selected Notch Frequency filter.
double * Frequency (Hertz) for notch filter.
double * Band width (Hertz) for notch filter.
double * Gain for notch filter.
256
Programmer's Manual