Eventextendedconfigurationactionset - Newport XPS Programmer's Manual

XPS Unified
7.2.1.23

EventExtendedConfigurationActionSet

Name
EventExtendedConfigurationActionSet – Defines a combination of one or several
actions in buffer.
Input tests
- Refer to section 7.1: "Input Tests Common to all XPS Functions".
- Action parameters: (-17), (-8)
- Action to execute: (-32) "Gathering" action.
- Action name: (-39)
- Last action configured in memory: (-81)
Description
Defines a combination of one or several actions but does not activate the actions. Use
the "EventExtendedStart" function to activate these defined actions. For each action, 4
parameters can be configured ... see event specification to see which are necessary. The
actions are defined in section "Events and Actions" in the XPS user's manual.
The number of actions in a combination is limited to 10 actions.
Refer to section 8.2: "Actions List".
Before activating the defined actions, you must configure the events. Only then,
can you use the "EventExtendedStart" or "EventExtendedWait" function.
For the "ExecuteTCLScript" action, the "ActionParameter3" represents a list of
arguments, which must be separated with a semicolon (;).
Prototype
int EventExtendedConfigurationActionSet(
int SocketID,
int NbElements,
char * ExtendedActionName,
char * ActionParameter1,
char * ActionParameter2,
char * ActionParameter3,
char * ActionParameter4)
NOTE
65
Programmer's Manual
EDH0373En1023 — 01/18