Atmf Backup Enable - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF BACKUP ENABLE

atmf backup enable
Overview This command enables automatic AMF backups on the AMF master node that you
are connected to. By default, automatic backup starts at 3:00 AM. However, this
schedule can be changed by the
initiated and stored only on the master nodes.
Use the no variant of this command to disable any AMF backups that have been
scheduled and previously enabled.
atmf backup enable
Syntax
no atmf backup enable
Default Automatic AMF backup functionality is enabled on the AMF master when it is
configured and external media, i.e. an SD card or a USB storage device or remote
server, is detected.
Mode Global Configuration
Usage A warning message will appear if you run the
either insufficient or marginal memory availability on your external storage device.
You can use the command
of space available on your external storage device.
Example To turn on automatic AMF backup, use the following command:
AMF_Master_1#
AMF_Master_1(config)#
Related show atmf
Commands
show atmf backup
atmf backup
atmf backup now
atmf enable
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
configure terminal
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
atmf backup command. Note that backups are
atmf backup enable
show atmf backup on page 2121 to check the amount
atmf backup enable
command with
2036