Wrr-Queue Egress-Rate-Limit Queues - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
- - -
WRR QUEUE EGRESS RATE LIMIT QUEUES

wrr-queue egress-rate-limit queues

Overview Sets a limit on the amount of traffic that can be transmitted per second from these
queues. The default unit is in Kb, but Mb or Gb can also be specified. The minimum
is 651Kb.
wrr-queue egress-rate-limit <bandwidth> queues
Syntax
[0][1][2][3][4][5][6][7]
no wrr-queue egress-rate-limit <bandwidth> queues
[0][1][2][3][4][5][6][7]
Mode Interface Configuration
Example To limit the egress rate of queues 0, 1 and 2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
2
Related show mls qos interface
Commands
613-50157-01 Rev C
Parameter Description
<bandwidth>
Bandwidth <1-40000000 kbits> (usable units: k, m, g).
[0][2]...[7]
Selects one or more queues numbered 0 to 7.
configure terminal
interface port1.0.1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
wrr-queue egress-rate-limit 500M queues 0 1
903