Table of Contents
Advertisement
A
T
M
F
LLIED
ELESIS
ANAGEMENT
ATMF BACKUP REDUNDANCY ENABLE
atmf backup redundancy enable
Overview
This command is used to enable or disable AMF backup redundancy.
atmf backup redundancy enable
Syntax
no atmf backup redundancy enable
Default
Disabled
Mode
Global Configuration
Usage
If the AMF Master or Controller supports any removable media (SD card/USB), it
uses the removable media as the redundant backup for the AMF data backup.
This feature is valid only if remote file servers are configured on the AMF Master or
Controller.
Example
To enable AMF backup redundancy, use the commands:
awplus#
awplus(config)#
To disable AMF backup redundancy, use the commands:
awplus#
awplus(config)#
Related
atmf backup synchronize
Commands
show atmf backup
show atmf backup area
C613-50103-01 REV A
™ (AMF) C
RAMEWORK
OMMANDS
configure terminal
atmf backup redundancy enable
configure terminal
no atmf backup redundancy enable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2043
Advertisement
Table of Contents
