VRRP C
OMMANDS
VRRP VMAC
vrrp vmac
Overview
Use this command to enable or disable the VRRP Virtual MAC feature. This feature
is used by VRRP to make the hosts use the virtual MAC address as the physical
hardware address of their gateway.
A VRRP router master will use the virtual MAC address for any ARP responses
associated with the virtual IP address, or any gratuitous ARPs sent on behalf of the
virtual IP address.
All VRRP advertisements are sent using this virtual MAC address as the source MAC
address.
The virtual MAC address has the form 00:00:5e:00:01:<VRID>, where VRID is the ID
of the Virtual Router.
vrrp vmac {enable|disable}
Syntax
Mode
Global Configuration
Examples
To enable Virtual MAC enter:
awplus#
awplus(config)#
To disable Virtual MAC enter:
awplus#
awplus(config)#
Related
virtual-ip
Commands
virtual-ipv6
C613-50103-01 REV A
configure terminal
vrrp vmac enable
configure terminal
vrrp vmac disable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1993