Maximum-Access-List - Allied Telesis x510-28GTX Command Reference Manual

IP 4 S A C
V OFTWARE CCESS ONTROL
- -
MAXIMUM ACCESS LIST

maximum-access-list

Overview Use this command to set the maximum number of filters that can be added to any
access-list. These are access-lists within the ranges 1-199, 1300-1999 and
2000-2699, and named standard and extended access-lists.
The no variant of this command removes the limit on the number of filters that can
be added to a software access-list.
maximum-access-list <1-4294967294>
Syntax
no maximum-access-list
Mode Global Configuration
Example To set the maximum number of software filters to 200, use the commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
Parameter
<1-4294967294>
configure terminal
maximum-access-list 200
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Filter range.
1553