Pim-Dm Commands - Allied Telesis AT-9108 Manual

PIM-DM Commands

Command
config pim-dm add vlan [<name> | all]
config pim-dm delete vlan [<name> | all]
config pim-dm timer <hello_interval>
config pim-dm vlan [<name> | all] trusted-
gateway [<access-profile> | none]
disable pim-dm
enable pim-dm
show pim-dm {vlan <name>}
unconfig pim-dm {vlan <name>}
AT-9108, AT-8518, AT-8525, and AT-8550 User's Command Guide
Description
Enables PIM-DM on an IP interface. When an IP interface is created,
per-interface PIM-DM configuration is disabled by default.
Disables PIM-DM on an interface.
Configures the global PIM-DM timers. Specify the following:
hello_interval — The amount of time before a hello
message is sent out by the PIM-DM router. The range is 1 to
65,519 seconds. The default setting is 30 seconds.
Configures PIM-DM to use the access profile to determine which
PIM-DM neighbor is to receive or reject the routes.
Disables PIM-DM on the system.
Enables PIM-DM on the system. The default setting is disabled.
Displays the PIM-DM configuration and statistics. If no VLAN is
specified, the configuration is displayed for all PIM-DM interfaces.
Resets all PIM-DM settings to their default values.
29