Table of Contents
Advertisement
S
C
M
YSTEM
ONFIGURATION AND
SHOW DEBUGGING
show debugging
Overview
This command displays all debugging options in alphabetical order, indicating
whether debugging is enabled or disabled for each feature.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show debugging
Mode
User Exec and Privileged Exec
Example
To find out what debugging is enabled, use the command:
awplus#
Output
Figure 7-6:
C613-50644-01 Rev B
C
ONITORING
OMMANDS
show debugging
Example output from the show debugging command
awplus#show debugging
AAA debugging status:
Authentication debugging is off
Accounting debugging is off
% DHCP Snooping service is disabled
802.1X debugging status:
EPSR debugging status:
EPSR Info debugging is off
EPSR Message debugging is off
EPSR Packet debugging is off
EPSR State debugging is off
IGMP Debugging status:
IGMP Decoder debugging is off
IGMP Encoder debugging is off
...
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
255
Advertisement
Table of Contents
