Spanning-Tree Mst Configuration - Allied Telesis x310-26FT Command Reference Manual

S T C
PANNING REE OMMANDS
-
SPANNING TREE MST CONFIGURATION

spanning-tree mst configuration

Overview Use this command to enter the MST Configuration mode to configure the Multiple
Spanning-Tree Protocol.
spanning-tree mst configuration
Syntax
Mode Global Configuration
Examples The following example uses this command to enter MST Configuration mode. Note
the change in the command prompt.
awplus#
awplus(config)#
awplus(config-mst)#
C613-50103-01 REV A
configure terminal
spanning-tree mst configuration
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
584