Table of Contents
Advertisement
L
A
C
INK
GGREGATION
OMMANDS
-
-
LACP GLOBAL
PASSIVE
MODE ENABLE
lacp global-passive-mode enable
Overview
Use this command to enable LACP channel-groups to dynamically self-configure
when they are connected to another device that has LACP channel-groups
configured with Active Mode.
lacp global-passive-mode enable
Syntax
no lacp global-passive-mode enable
Default
Enabled
Mode
Global Configuration
Usage
Do not mix LACP configurations (manual & dynamic). When LACP global passive
mode is turned on (by using the lacp global-passive-mode enable command),
we do not recommend using a mixed configuration in a LACP channel-group; i.e.
some links are manually configured (by the channel-group command) and others
are dynamically learned in the same channel-group.
Example
To enable global passive mode for LACP channel groups, use the command:
awplus(config)#
To disable global passive mode for LACP channel groups, use the command:
awplus(config)#
Related
show etherchannel
Commands
show etherchannel detail
C613-50103-01 REV A
lacp global-passive-mode enable
no lacp global-passive-mode enable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
611
Advertisement
Table of Contents
