Spanning-Tree Transmit-Holdcount - Allied Telesis x310-26FT Command Reference Manual

S T C
PANNING REE OMMANDS
- -
SPANNING TREE TRANSMIT HOLDCOUNT

spanning-tree transmit-holdcount

Overview Use this command to set the maximum number of BPDU transmissions that are
held back.
Use the no variant of this command to restore the default transmit hold-count
value.
Syntax spanning-tree transmit-holdcount
no spanning-tree transmit-holdcount
Default Transmit hold-count default is 3.
Mode Global Configuration
awplus#
Example
awplus(config)#
C613-50103-01 REV A
configure terminal
spanning-tree transmit-holdcount
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
603