Save Configuration; Reload; Verify Dcb Status; Configure Additional Switch - Dell S4048-ON Configuration Manual
Networking s-series for dell ps series sans
Hide thumbs
Also See for S4048-ON:
- Configuration manual (1146 pages) ,
- Deployment manual (78 pages) ,
- Troubleshooting manual (29 pages)
Table of Contents
Advertisement
Use the following steps to configure the native VLAN on the switch.
Dell#configure
Dell(conf)#no interface vlan vlan-id
4.4
Save configuration
Dell#copy running-config startup-config
4.5
Reload
Dell#reload
System configuration has been modified. Save? [yes/no]yes
Proceed with reload [confirm yes/no]yes
Note: The switch will reboot.
4.6
Verify DCB status
Dell#show dcb
The following status is displayed:
DCB Status : Disabled
4.7
Configure additional switch
Repeat the commands from section 4 to disable DCB on any additional switches.
14
SCG1026
Dell Networking S4048-ON Switch Configuration Guide for PS Series SANs
Hide quick links:
Advertisement
Table of Contents
