Detection Of Abnormality; Types Of Abnormality; Description Of Abnormality; Add Paper - Toshiba e-STUDIO 5540C Service Manual

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO 5540C:

Table of Contents

Detection of Abnormality

When something abnormal has occurred in the equipment, symbols corresponding to the type of

abnormality are displayed.

1. Abnormalities cleared without turning OFF the door switch

(A) Add paper

(B) Paper misfeed in bypass

2. Abnormalities not cleared without turning OFF the door switch

(D) Misfeed in equipment

(E) Waste toner box replacement

3. Abnormality not cleared without turning OFF the main power switch

(F) Call for service

[A] Add paper

[In case of the equipment drawer or PFP drawer] (When no drawer is installed)

Drawer not detected

Drawer is not installed:

Drawer is installed but there is no paper in it:

A signal sent to the control circuit

Drawer area of the control panel blinks

(When the drawer is selected)

[START] button is disabled.

[In case of the equipment, tandem LCF] (When a drawer is installed)

Based on the combination of the tray-up motor (M44, M45) movement and the status of the tray-up

sensor and empty sensor, The CPU detects the presence of paper.

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C

OUTLINE OF THE MACHINE

Show Quick Links

Table of Contents