Detection Of Abnormality; Types Of Abnormality - Toshiba e-studio 167 Service Manual

4.3

Detection of Abnormality

When something abnormal has occurred in the equipment, the symbols corresponding to the type of
abnormality are displayed.
4.3.1

Types of abnormality

1) Abnormality cleared without turning OFF the door switch
(A) Add paper
(B) Pick-up failure in bypass
2) Abnormality not cleared without turning OFF the door switch
(C) Misfeed in equipment
(D) Replace the toner cartridge
(E) Developer unit not installed properly
3) Abnormality not cleared without turning OFF the main switch
(F) Call for service
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
4 - 5
e-STUDIO167/207/237
GENERAL OPERATION
4