Mj-1103/1104 (Finisher) - Toshiba e-STUDIO 5540C Service Manual

4.12.2

MJ-1103/1104 (Finisher)

(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the interface cable of the finisher.
(3) Open the cover.
(4) Pull the lever to release the lock.
(5) Separate the finisher from the equipment
while pulling the lever.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-7
Fig. 4-8
Fig. 4-9
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 305
Interface cable
Lever
DISASSEMBLY and REPLACEMENT
4