Registration Sensor (S28); 1St Drawer Feed Sensor - Toshiba e-STUDIO2330C Service Manual

11.6.30 Registration sensor (S28)

(1) Take off the registration guide.
 P.11-32 "11.6.29 Registration guide"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the registration sensor with its
bracket.
(3) Remove the seal, and then take off the
registration sensor.
11.6.31 1st drawer feed sensor (S30)
(1) Take off the registration guide.
 P.11-32 "11.6.29 Registration guide"
(2) Disconnect 1 connector and remove 1 screw.
Then take off the 1st drawer feed sensor with
its bracket.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
PAPER FEEDING SYSTEM
Registration sensor
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
11 - 34
Fig. 11-67
Registration sensor
Fig. 11-68

1st drawer feed sensor

Fig. 11-69