Hitachi Compute Blade 2000 User Manual page 1674

(e) moduleConfigPs group (2/2)
Object
No
identifier
13 psInfoHotspo .1.3.6.1.4.1.11
tTempHigher 6.5.39.2.7.1.1.
10
14 psInfoHotSp .1.3.6.1.4.1.11
otTempLowe 6.5.39.2.7.1.1.
r 11
15 psInfoExhau .1.3.6.1.4.1.11
stTempHigh 6.5.39.2.7.1.1.
er 12
16 psInfoExhau .1.3.6.1.4.1.11
stTempLowe 6.5.39.2.7.1.1.
r 13
(*1) "Not install" is shown if no power supply module is installed; "Cannot get data" is shown
if the power supply module data cannot be obtained.
(*2) "0" is shown if no power supply module is installed or if no power supply module data
can be obtained.
OID Syntax
Integer32
Integer32
Integer32
Integer32
1623
Acces
Description
s
RO Shows the upper temperature
threshold value of HotSpot for
warning to the power supply
module installed in the slot
shown in #5. This value is
shown as 1 for 0.1°C. (*2)
RO Shows the lower temperature
threshold value of HotSpot for
warning to the power supply
module installed in the slot
shown in #5. This value is
always shown as 0.
RO Shows the upper temperature
threshold value of exhaust air for
warning to the power supply
module installed in the slot
shown in #5. This value is
shown as 1 for 0.1°C. (*2)
RO Shows the lower temperature
threshold value of exhaust air for
warning to the power supply
module installed in the slot
shown in #5. This value is
always shown as 0.